How To Root Yu Yutopia And Install TWRP Recovery



YU  launched YUTOPIA (YU5050), the company’s flagship smartphone, as it promised. It has a 5.2-inch (1440 x 2560 pixels) Quad HD IPS display with 91% NTSC color gamut from Sharp, is powered by an Octa-Core 64-bit Qualcomm Snapdragon 810 processor and runs on Cyanogen OS 12.1 based on Android 5.1.1 (Lollipop). It features a 21-megapixel auto focus rear camera with dual-tone LED Flash, Sony Exmor RS IMX230 sensor, phase-detection auto-focus (PDAF) and a 8-megapixel front-facing camera. It has a full metal body and a fingerprint sensor on the back.

 First Unlock Bootloader on Yu Yutopia and before you unlock Backup all of your data and settings, as unlocking bootloader wipes all of your data.

Disclaimer We should not be held liable or responsible for any damage to your Yu Yutopia and you are at your own risk in following the steps below.

Downloads:
SuperSU.zip (Download and copy it to Root of your device’s internal or external storage)

HOW TO INSTALL TWRP RECOVERY ON YU YUTOPIA

Step 1: Download the TWRP Recovery Image for Yureka Plus from the above links.
Step 2: Copy it inside the Fastboot folder and make sure it is in .img format. Rename the file to twrp.img
Step 3: Open Command Prompt inside the Fastboot folder. How?
  • Open Fastboot folder.
  • Press and hold shift key and right click inside the Fastboot folder at the empty space.
  • Select Open Command window here.
Step 4: Connect Yureka Plus to PC in Fastboot Mode. 
Step 5: Now in CMD Type the following commands and hit enter after each command.
fastboot –i 0x1ebf devices
This command lists the device connected to PC in Fastboot mode and it is used to confirm whether Yureka Plus is successfully connected to PC in Fastboot Mode.
fastboot –i 0x1ebf flash twrp.img
This command will flash the TWRP Recovery on Yureka Plus YU5510. If you don’t want to flash the TWRP Recovery, instead you want to boot from it so that you can install the SuperSU.zip file and remain on Stock Recovery, then use the below command:
fastboot –i 0x1ebf boot twrp.img
Now reboot your device by issuing the following command:
fastboot –i 0x1ebf reboot
That’s it now you have successfully Installed TWRP Recovery on Yureka Plus YU5510 Android Smartphone and now it’s time to Root it.

HOW TO ROOT YU YUTOPIA

Step 1: Download the SuperSU.zip and copy it either to your device’s internal or external storage. Make sure to copy at the root directory, but not inside any folder.
Step 2: Power off Yureka Plus and boot into Recovery Mode. How?
  • Power off the device.
  • Press and hold Volume UpVolume Down and Power buttons until you see YU Logo.
Step 3: From TWRP Recovery flash the SuperSU.zip file and wipe cache. 
Step 4: Once installed Reboot your device.
Step 5: Check for Root Permissions using Root Checker App.
That’s all now you have successfully Rooted Your Device
Unknown
Unknown

Previous
Next Post »